Dodge Durango Forum - Forums and Owners Club! banner

Phase 1 of my Emergency Lighting

4K views 4 replies 2 participants last post by  911Boulder 
#1 ·
Well I finally got all the parts needed for the first phase of my Emergency Lighting on my Durango... I'm a Volunteer Fire Fighter, EMS First Responder and Rescue Tech for a couple of departments in my area.

Here's a rundown of the equipment currently installed:

Front:
- Feniex Pegasus Interior Lightbar, all blue (top of the windshield)
- Feniex Python 100, blue (bottom of windshield)
- Feniex T-6 lightheads (8 in the grill, run off of 2 Whelen ULF-44 LED FLashers)
- Feniex Titan T-300s, white (Custom made, mounted in the lower grill, run off the "Wig-Wag" outputs on the Controler w/ steady over-ride)
- Whelen UHF-2150A HLF

Sides:
- Feniex T-6 lightheads, blue (mounted on a StrobesNMore Intersection Bracket)
- Feniex T-6 lightheads, blue (mounted on Feniex Rotating Bracket in the rear side window)

Rear:
- 911EP TD/WL36, blue (used as a warning bar and traffic advisor)

Controls:
- Feniex 4200


Here are a couple Vids:

Walk-Around Vid
https://www.youtube.com/watch?v=FfBN9Q_gHhs

T/A Demo
https://www.youtube.com/watch?v=w7hl0qHL0p0

HLF/Wig-Wag/TakeDown Demo
https://www.youtube.com/watch?v=V679XfGgvik



Future Plans:
- Replacing the T-6s in the rear side windows with Feniex Cobra 200s
- Moving the T-6s in the rear side windows to the B-Pillar
- Some Feniex Apollo Lightheads in the rear somewhere
- Replacing the 911EP TD/WL36 with a Feniex Cobra 800 for a T/A in the rear, and running it off of the T/A Outputs of the 4200
- Feniex Rocker Kit
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top