2011 Dodge Durango Crew jammed hvac blend door on passenger side.
On the passenger side, the blend door gear seems to have rotated beyond the stop and jammed, so I am only able to get heat from any of the vents on passenger side
I am trying to figure out how to access the inside of the housing to reset the blend door so that it is in correct position and move the 90 degrees or so that it is intended. I can move the door only about 5 degrees by rotating the gear by hand. . .
Do I need to take entire dash apart to access, or is there some way in from the side that the actuator goes on?
Any guidance would be appreciated.
DurangoForumz.com | Dodge Durango Forum | Dodge Durango Forums | Dodge Durango Performance | Dodge Durango Accessories